The reinforced aluminum mechanism for rotary street blinds "Wood Brothers Two-sided" 1m (installation size 950mm) has the ability to be combined with each other to set any length or height and consists of right and left guide parts and provides a change in the angle of inclination of the internal filling (figured slats) of the finished structure.

A feature of this mechanism is the ability to obtain "two in one" options for closing the figured slats: turning to one extreme position gives the option of closing the structure "into a herringbone" (with little ventilation), and, in turn, turning to the other opposite side to the edge, gives the option of closing "into a solid wall", when the slats due to their design are placed in the same plane, and the intermediate value between these two operating modes of the mechanism allows you to see through the entire structure.

Mechanisms for Wood Brothers rotary street blinds are made entirely of aluminum and assembled on special rivets, which simultaneously provide strong connections and the possibility of rotational movement of the mechanism elements. The basis of the mechanism is an aluminum rectangular tube 20x10x1.5mm thick and aluminum angles 20x20x2mm with a strip 20x2.0mm thick. which ensures the strength of the structure for all types of loads and is the key to reliable operation of the mechanism as a whole. (The manufacturer of the product reserves the right to make changes to the design, appearance, equipment and characteristics of the product without prior notice)

An important element that compensates for temperature differences in summer and winter and allows the mechanisms to work "two-way" and properly without friction of metal against metal and without jamming when heated by scorching sunlight are special plastic washers.

It is worth noting that in order to ensure the correct operation of the structure, to be able to fix the entire internal filling of the slats at any set angle of inclination, during installation, the principle of co-axiality of the slats to the shelves of the mechanism on which they are mounted should be observed.

Mechanisms for rotary street blinds Wood Brothers can perform their function as a separate mechanism or be part of one large mechanism. All mechanisms have the ability to be combined into one structure of the length or height you need using special connections (not included in the kit). This ensures inexpensive transportation of such mechanisms and preservation of their geometry, which is difficult, and sometimes impossible, to do for continuous mechanisms of large lengths, for example, 2.5-3.0-3.5 meters.

If desired, you can install an automatic drive for the mechanism to operate on a remote control (not included in the kit).

Mechanisms for rotary street blinds Wood Brothers are used both externally for openings in the walls of gazebos, gazebos, terraces, windows and internally for zoning and separating parts of the room from each other. Outside, on the street, as a rule, installation is carried out in such a way that the mechanisms are located vertically, and the slats - horizontally - "horizontal type of operation of the structure". This arrangement allows the structure to operate all year round, without fear of the influence of any precipitation and winter operating conditions, since the mechanisms do not suffer from frostbite or icing, which is possible when the mechanisms are located at the bottom and top of the opening, and the slats are in a vertical position - "vertical type of operation of the structure". The second installation option is widely used inside residential premises, in offices, on windows, in technical rooms and garages.

The internal filling (shaped slats) of the structure should be made exclusively of dried and appropriately treated with protective agents wood of a special shaped section with beveled edges of the planken type (or with a sample) in sizes: 108 mm wide and 19-20 mm thick, wood, thermowood, aluminum, sheet metal, polycarbonate, plastic, etc. The recommended maximum length of the internal filling (shaped slats) should be up to 1.5 m in the horizontal arrangement of the slats and up to 2.0 m in the vertical arrangement of the slats, in order to prevent changes in the geometry of the slats from their own weight and under the influence of the environment. The internal filling (shaped slats) is not included in the delivery set. The set includes the right and left parts of the mechanism and hardware for fastening the slats.