The figured lamella 108x19mm spruce species is used for rotary mechanisms for garden blinds of the "Light" series and the "Two-sided" series and is a dry lamella board of figured cross-section in the size of 108x19mm and a length of 1000mm (min 970mm), 1500mm (min 1470mm), 2000mm (min 1970mm), 2500mm (min 2470mm) and 3000mm (min 2970mm). When calculating the cost, the integer value of the length is taken into account. When installing independently, if necessary, the lamella is cut to the required length. When using a hard wood species as lamellas, it is recommended to make holes before installing the lamellas in the places of their attachment to the rotary mechanisms to prevent possible cracking of the edges. For proper and long-term operation of the structure, it is necessary to protect the lamella board from weather conditions by treating it with special primers and impregnations to protect against moisture ingress and prevent its geometry from changing. Depending on the selected paint and varnish coating, it is recommended to renew the protection from time to time by re-applying it.
PLEASE NOTE - in the dimensions of the lamella lengths, a smaller value of up to -30 mm is allowed, as this is technically compensated by the dimensions of the mechanisms during installation.